butt joint
英 [bʌt dʒɔɪnt]
美 [bʌt dʒɔɪnt]
对接
英英释义
noun
- a joint made by fastening ends together without overlapping
双语例句
- The weld and installation of the plugging triple valve is first step of the plugging procedure. There are two major steps: First, the welded butt joint between the upper and lower backplates.
三通封堵结构的焊接安装是封堵操作的第一步，其主要分为上下护板间的对接和上下护板与管材间的角焊接。 - The system has extensive application prospects on ocean development, comprehensive supply of shipping, space butt joint.
本系统在水面及水下平台作业、补给船综合补给、船舶吊放货物以及空间对接等领域有广泛的应用前景。 - Study on the Welding Procedure of Butt Joint of 10CrNi3MoV/ BFe30-1-1 Clad Plate Elbow
10CrNi3MoV/BFe30-1-1复合板大尺寸弯头对接接头焊接工艺研究 - Test shows that this way can exhibit good result to butt joint and lap joint of TIG welding and accurately abstract welding seam out, to the welding seam of large magnitude dogleg angle shows good tracking effect ( dogleg angle< 68 °) and procession speed< 100 ms.
实验表明，系统对TIG焊的对接和搭接焊缝有很好地处理效果，对大幅度折线焊缝也能很好的跟踪（折线角>68°），处理速度>100ms。 - Relationship between butt joint gap and cold crack rate of 16 Mn steel underwater wet welding is studied.
研究了水下湿法焊对接接头间隙与裂纹率的关系。 - Vision system of butt joint gap width measurement for laser welding
激光焊接对接接头间隙宽度视觉测量系统 - An interface formed by joining the ends of two optical fibers in a coaxial ( in-line) butt joint for direct fiber-to-fiber transmission.
为使光纤对光纤直接传输，将两根光纤的端面以同轴对接方式进行连接所形成的一种界面。 - Based on the characteristics of such weld pool images, the algorithm of image processing is designed. The whole edge of weld pool is extracted. The parameters of weld pool surface geometry are obtained under different TIG welding conditions of butt joint.
根据对接TIG焊熔池图像特点，设计出图像处理算法，检测出了焊接熔池的整个边缘，得到了不同工艺条件下对接TIG，焊熔池几何形状参数的实际尺寸。 - Select a connecting mode, branching or butt joint, suggest using XKM insulation piercing connector;
选用一种连接方式，分支或对接，建议使用XKM绝缘穿刺线夹； - Most scholars mainly adopted one dimension variation analysis model, and took qualitative analysis on the butt joint, lap joint of the parts in the research field of assembly sequence optimization which targets was dimension quality.
以装配尺寸质量为目标的装配顺序优化研究方面，多数学者主要采用一维的偏差分析模型，对零件间的对接、搭接等接头形式进行定性分析。